TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was developed by two guys in California. They wanted to develop a cool writing instrument that looked like a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the marketplace by storm.

smok pen

The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the build quality is just as good as any of the pens that I’ve reviewed. For the reason that of how they made the top cap. You don’t need to worry about the cap cracking or breaking on you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens is the form of the coils and the way that they are built. Generally the coil on a Smok Pen is larger than on other pens. I think that they did this on purpose, to make the pen feel more substantial.

Invest the a look at a Smok Pen, you will observe that your body of the pen is round rather than smooth like other pens. On the trunk of the pen you will find a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on and off. I really liked this feature since it allows me to use the Smok Pen 22 whenever Personally i think like smoking.

To utilize the Smok Pen you have to keep the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it reaches the appropriate temperature you can turn off the heating element. Smok recommends utilizing a 22mm tank. I prefer a more substantial tank, but that’s just me.

When you put your Smok Pen into the tank you will notice a indicator light come on. The indicator light will stay green unless you put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen into the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see in case you are at the right temperature for the coils to fire. If not then you should turn the power off and try again. If you are still not satisfied together with your Smok Pen then I suggest you take it in for some troubleshooting. This is what I would call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the following two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.

Before you go any further you should take away the battery from your pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. After you have loosened this wire after that you can access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful to not touch the coils.

After you have placed the sub-ohm tank in to the pen you should then place the rest of the components like the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Turn on the energy and follow the on screen instructions. You need to place the pen’s battery in to the microwave and activate the setting. You should then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set then you should follow the on screen instructions.

After the Smok Pen Vape Shop has reached the temperature that it needs to reach you should then connect the two wires to the negative and positive on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s on / off switch.

After all the components have been placed in to the pen, you should turn the energy on. Following the first test run, you should be able to start to see the battery life indicator light come on. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a fresh one. For your convenience there is also a green light that could be pressed in order to confirm the battery charging status. Once you have done these things and you also do not start to see the green light indicating charging, you need to replace the battery.